Solar thermal hot water solutions including solar hot water panels, solar transfer stations and controllers.
The Trigon solar thermal hot water system is suitable for up to a collector field of 60m².
- Choice of application for the right solar energy solution for your commercial heating and hot water projects.
- Integrates with Hamworthy’s other commercial hot water solutions to provide an effective sustainable energy solution.
- 9 pre-defined solar system schemes for ease of design and installation.
- Sloping or flat roof mounting options for fit with a range of roofing material.
- Reduces fuel bills and combats climate change.
- We’ll support you through the product selection process with full solar project assistance with sizing (using T’Sol software) and selection of equipment to match your application.
| Units | Collector model | |||
| Trigon 2.3V | Trigon 2.3H | |||
| Energy | Collector output @ irradiance 1000W/m2 and 20l/hr/m2 solar fluid flow rate |
kW | 1.57 | 1.57 |
| Collector yield per annum per m2 absorber area @ irradience 1000W/m2 and 20l/hr/m2 collector flow |
kWh/m2 | 785 | 785 | |
| Optical Efficiency* | % | 80.4 | 79.4 | |
| Heat loss coefficient a1 *(Thermal Transmittance, linear K1) | W(m2K) | 3.235 | 3.494 | |
| Heat loss coefficient a1 *(Thermal Transmittance, quadratic (K2) W/m/°C) |
W(m2K) | 0.0117 | 0.015 | |
| Maximum idle temperature | °C | 194 | 198 | |
| Irradiation angle correction factor IAM-50 | % | 94.0 | 95.4 | |
| Specific thermal capacity C* | kJ/(m2K) | 5.85 | 6.3 (8.073) | |
| Effective thermal capacity | kJ/K | 11.75 | 12.6 | |
| Maximum operating pressure | bar | 10 | 10 | |
| Solar fluid | Recommended Max flow rate per collector | litres/hr. | 20 | 20 |
| Recommended solar fluid | - | Propylene glycol e.g. Tyfocor L (diluted 40% Tyfocor /60% water) |
||
| Maximum solar fluid pressure | bar | 10 | 10 | |
| Maximum stagnation temperature at 1000W/m2 and 30°C | °C | 194 | 198 | |
| Solar fluid content | litres | 1.7 | 1.9 | |
| Collector | Surface area of collector, gross | m2 | 2.3 | 2.3 |
| Aperture surface area | m2 | 2.0 | 2.0 | |
| Effective absorber surface area | m2 | 2.0 | 2.0 | |
| Tempered solar safety glass, resistant to hail (EN12150, EN12975) thickness |
mm | 3.2 | 3.2 | |
| Mechanical strength of the glass cover to climatic loads (wind lift and snow loading) |
Pa | 3200 | 3200 | |
| Depth of Rockwool Insulation in base of housing | mm | 55 | 60 | |
| Angle of installation | degrees | From 15° to 90° depending on fixings | ||
| *Values to EN 12975 | ||||
| Title | Type | Size | ||
|---|---|---|---|---|
|
Hot Water from Hamworthy | Product brochures | 16516 ko | Download |
|
Trigon solar brochure | Product brochures | 7382 ko | Download |
|
Trigon technical data table | Data tables | 556 ko | Download |
|
Trigon solar DeltaSol BS2 controller installation manual | Installers guides | 2855 ko | Download |
|
Trigon solar DeltaSol M controller installation manual | Installers guides | 1416 ko | Download |
|
Trigon solar ST1 dual aspect pump station installation manual | Installers guides | 1185 ko | Download |
|
Trigon solar ST1 pump station installation manual | Installers guides | 6036 ko | Download |
|
Trigon solar ST2 pump station installation manual | Installers guides | 8642 ko | Download |
|
Trigon solar ST3 pump station installation manual | Installers guides | 3182 ko | Download |
|
Trigon solar WMZ calorimeter heat meter installation manual | Installers guides | 1578 ko | Download |
|
Trigon solar collector installation manual | Installers guides | 3231 ko | Download |
- Suitable for both new build and retrofit installations.
- Can be mounted on different types of sloping roofs, or via an A frame for flat roofs or ground level.
- DL2 datalogger with software.
- Solar collector lifting straps.
- UV sensor kit.
- Additional temperature sensor.
- Tank temperature sensor.
- Sensor lightning protection box.
- Remote alarm module.
- Heat metering equipment including RHI approved apparatus.